To Change the Time and Date on a Partner ACS System

This must be done at extension 10 or 11:
Press Feature and dial 00
Press the left intercom button twice
To set the time, press the pound (#) key and dial 103. Enter the correct time using a 24-hour clock (if it’s afternoon, add 12 to the […]

On most Toshiba Systems you can change the time by doing the following.
Hit #652 (the time(24 Hrs) including the seconds followed by #.
Example
For 4:20 pm
#652 162000 #
We also wrote about this previously here

In order to change the Time and Date on a Norstar system, Try using [FEATURE] ** 8463 (TIME). The password is 23646 (ADMIN). At this point you should be able to change the time and date with no problem. If this does NOT work on your system, the reason may be that the software that […]

Sometimes when you put a new (or alternate) voicemail system on a Norstar switch, The feature codes that accessed the old system stay in the KSU memory. If this is the case all of your feature codes will appear inactive even if the voicemail system is operating correctly.
To fix this issue you need to run […]

All programming from a Toshiba telephone must be done from the programming set, a 20 button display phone. This set will be assigned to DN 10 or 200.
There are three steps to Setting the date and time on your Toshiba DKT display telephone. With the handset ON the cradle you proceed as follows:
First you set […]