Toshiba Common Cards

View as
Grid List
Set Ascending Direction
  • Toshiba RPTU2A PRI ISDN Card

    Toshiba RPTU2A Strata ISDN Primary Rate Interface Unit

    Toshiba RPTU2A Strata ISDN Primary Rate Interface Unit

    $599.00
  • Toshiba BSIS1A 4-Port Serial Interface Subassembly Card

    Provides two RS-232 serial ports with modular jacks. Required for SMDR or SMDI. Mounts on ACTU or BECU processor card. Includes 1 serial port license. Additional serial port license required to activate serial port 2.

    Provides two RS-232 serial ports with modular jacks. Required for SMDR or SMDI. Mounts on ACTU or BECU processor card. Includes 1 serial port license. Additional serial port license required to activate serial port 2.

    $199.00
  • Toshiba BSTU1A 8 Circuit Standard Card

    Provides 8 standard telephone station ports. 1 port per DTMF or rotary telephone, or peripheral device such as Voice Mail, Auto Attendant, fax, etc. 1 port per off-premises station.     Compatible with the following systems:  CTX100  CTX670  DK40i  DK424i

    Provides 8 standard telephone station ports. 1 port per DTMF or rotary telephone, or peripheral device such as Voice Mail, Auto Attendant, fax, etc. 1 port per off-premises station.     Compatible with the following systems:  CTX100  CTX670  DK40i  DK424i

    $199.00
  • Toshiba BVPU Circuit Card

    One BVPU required per system. Used for gateway/trunk connections.  Requires MCS software, user supplied PC and serial cable for connection to the BVPU.

    One BVPU required per system. Used for gateway/trunk connections.  Requires MCS software, user supplied PC and serial cable for connection to the BVPU.

    $799.00
  • Toshiba RMDS1A

    1 per system to provide a 1,200/2,400 BPS modem. Mounts piggyback onto the RSIU.

    1 per system to provide a 1,200/2,400 BPS modem. Mounts piggyback onto the RSIU.

    $99.00
  • Toshiba RMCU1 4 CAMA Trunk Circuit Card

    The RMCU PCBs provide up to four CAMA (centralized automatic message accounting) trunk circuits. The RMCU eliminates the need for connection of adjunct terminal adapter equipment to E911 (enhanced 911) CAMA trunks.  This feature sends the extension number of the telephone dialing 911 giving the 911 dispatcher can determine the exact location (building, floor, office number, etc) from where the call originiated.

    The RMCU PCBs provide up to four CAMA (centralized automatic message accounting) trunk circuits. The RMCU eliminates the need for connection of adjunct terminal adapter equipment to E911 (enhanced 911) CAMA trunks.  This feature sends the extension number of the telephone dialing 911 giving the 911 dispatcher can determine the exact location (building, floor, office number, etc) from where the call originiated.

    $399.00
  • Toshiba REMU1A 4 Port E&M Trunk Circuit Card

    E&M Tie line has 4 circuits (type 1 or 2 signaling, 2-wire or 4-wire available as a jumper block option)  Immediate start or wink start tie lines.  Requires ARCS on CTX100.  Requires K5RCU2 on DK40i and BRCS on DK424i DTMF operation.  Requires RRCS on DK424.  Primary protectors required.

    E&M Tie line has 4 circuits (type 1 or 2 signaling, 2-wire or 4-wire available as a jumper block option)  Immediate start or wink start tie lines.  Requires ARCS on CTX100.  Requires K5RCU2 on DK40i and BRCS on DK424i DTMF operation.  Requires RRCS on DK424.  Primary protectors required.

    $99.00
  • Toshiba RDTU3A 24 Port T1 Interface Circuit Card

    Provides 24 channels for T1 Service on CTX670, CTX100 or DK424i, and 12-channels on DK40i (requires R4.3). Network connection requires an external CSU.  Each RDTU3A requires 1 RDTU3-CBL-KIT cable kit.

    Provides 24 channels for T1 Service on CTX670, CTX100 or DK424i, and 12-channels on DK40i (requires R4.3). Network connection requires an external CSU.  Each RDTU3A requires 1 RDTU3-CBL-KIT cable kit.

    $399.00
  • Toshiba RDTU1A 24 Port T1 Interface Circuit Card

    Provides 24 channels for T1 Service on CTX670, CTX100 or DK424i, and 12-channels on DK40i. Network connection requires an external CSU.  Each RDTU1A requires 1 - NDTU cable.  Does not provide hook switch/flash capabilities to DID/ground start circuits. If these services are needed, you must upgrade to RDTU2A.

    Provides 24 channels for T1 Service on CTX670, CTX100 or DK424i, and 12-channels on DK40i. Network connection requires an external CSU.  Each RDTU1A requires 1 - NDTU cable.  Does not provide hook switch/flash capabilities to DID/ground start circuits. If these services are needed, you must upgrade to RDTU2A.

    $99.00
  • Toshiba RDSU1A 2 Standard Ports & 4 Digital Ports Circuit Card

    Adds 2 Single line stations /4 Digital Stations (DKT 2000 phones only)  Same as PDKU but does NOT accept DDSS consoles  Same as RSTU but does NOT support message waiting  Do NOT use for 3000 series digital phones. LCD display is only 16 characters wide and the speed dial button will NOT work.  Can add RSTS for additional 2 single line stations/4 digital stations (piggy back subassembly)

    Adds 2 Single line stations /4 Digital Stations (DKT 2000 phones only)  Same as PDKU but does NOT accept DDSS consoles  Same as RSTU but does NOT support message waiting  Do NOT use for 3000 series digital phones. LCD display is only 16 characters wide and the speed dial button will NOT work.  Can add RSTS for additional 2 single line stations/4 digital stations (piggy back subassembly)

    $99.00